Integrated Hi/Lo and Spring Kit

Click here for Customer Comments

This is the ultimate in Spring and HiLo setups.

As you can see from the picture below, the one on the left is the standard SRP001 Sracer spring and perch with a standard HiLo, the picture on the right is of this integrated SRP004 Sracer Spring and HiLo (the springs are the same). With this unit there is no need for the perch, reducing un-sprung weight.

Installation Tip, There is no need to try and get a wrench in there for adjustment. Simply use a #1 Philips screwdriver in the holes on the adjuster nut to turn the HiLo, then hand tighten the jam nut.

Hilo with band around the bottom is for the rear.